Home Maintenance
Before settling down in front of the fire for a long winter’s nap, there are a few important home maintenance chores that need to be taken care of first!
Home Maintenance Tips
To-Do #1: Change Water and Icemaker Filters
The disposable filters in your water filtration system and ice maker need to be changed at least twice a year, or as recommended by the manufacturer.
When filters become clogged, the flow of water slows and can allow mold to form inside the filter. Most water filters are easy to change, either by removing a screw-on cover or pressing a release tab. Be sure to take the old filter with you to the store, so that you can buy the correct replacement.
If you don’t have a water filter in your home, consider:
- Water Filtration Pitcher: With no installation required, filtration pitchers have you drinking filtered water in a flash by pouring water into the pitcher through a filter mounted in the lid.
- Faucet Mounted Water Filter: These units screw directly onto the end of your kitchen faucet, replacing the aerator with a valve that directs the water through the filter or out the faucet as desired.
- Countertop Mounted Water Filter: These larger filters are less likely to clog than faucet filters. They screw directly onto the faucet, with a tube connecting to the filtration unit on the counter.
- Under Sink Mounted Water Filter: These filters install under your sink and connect to a separate water dispenser installed next to the sink faucet. They require some plumbing and cutting a hole in your sink or countertop if one isn’t already available.
- Icemaker Filter: These may come built into your fridge or can be added to the water line supplying your icemaker.
- Whole House Water Filter: These units attach to your main water line and filter all the water entering the house. They generally only filter out rust and sediment.
To-Do #2: Clean Bathroom Tub and Sink Drains
Over time, hair and debris can build up in your bathroom drains, impeding the flow and causing water to back up into your tub or sink. Not only is this unpleasant, it lets dirty water to stand in your sink or tub, allowing mold and mildew to grow both in the basin and in the pipes.
To clean a tub or sink drain, you’ll first need to remove the drain assembly and any drain grates covering the drain opening. Clean these with an old toothbrush and paper towel.
You might also like: Getting a Bigger Home, Expand or Buy?
Next, insert a plastic drain stick into the overflow drain, then again in the main drain. A drain stick is about two feet long and is barbed or bristled to remove hair and gunk inside the pipe. Work the stick up and down, then carefully draw out debris and wipe it off with a paper towel.
Once the drains are clear, pour a cup of bleach down the drain, and let it sit for 10-15 minutes to kill any mold and mildew in the pipes. Finally, flush the drain thoroughly with hot water, and reinstall the drain assembly and grate.
Now that your drains are flowing freely again, get out your sponge and cleaners to give your tub and sink a good scrub!
If you’re in the market for a new home or looking to sell your existing home, give us a call today at (715) 821-6491 or check out the homes that are currently on the market at the Betty Most Agency.